This is a remote/ rotational position, working three weeks on and three weeks off, in Prudhoe Bay, AK. The typical schedule is 84 hours per week (40 hours straight time and a minimum of 44 hours at time and a half). All meals and lodging are provided by Worley while the employee is on location. Transportation between Anchorage and Prudhoe Bay is provided.

 Worley offers a competitive benefits package, with company paid short-term disability, life insurance, paid sick leave, and 4.5% employer match on 401k.

 

 

Job Purpose:

 

The General Maintenance Tech/ Equipment Operator performs duties including various manual, skilled, and/or un-skilled tasks as required for front-end loader operation, boom truck operation, knuckle-boom operation, operation of a semi tractor, mechanical piping installation/removal, structural installation, pipe lifting, scaffolding, rigging, in accordance with all client and Worley safety, environmental and operational practices, policies and procedures.

 

Essential Job Functions:

 

• Install/remove pig launchers and receivers with all associated valves and spools

• Perform isolations per ICC's to isolate launchers and receivers to load and unload pigs

• Assist client operators in loading, launching, tracking and unloading pigs

• Wash and rebuild pigs and perform various shop tasks

• Perform pigging spool/valve installation and removal, rigging, blinding and minor pipe fitting

• Perform manual labor including operation small hand tools and power tools (buffer/grinders, reciprocating saws drills shovels, etc.) and carrying and lifting materials (cribbing, shoveling snow and other activities)

• Perform heavy labor

• Assist building scaffold with qualified scaffold builder

• Performs manual labor supporting scaffolding activity, such as cleanup, hauling, stacking materials, shoveling, stack pipe skids, moving supports, handling steel materials and valves

• Demonstrate and promote safe work practices and adhere to company and client safety policy and procedures for performed, including proper hazard recognition and migration of tasks and accept accountability for safe work practices

• Demonstrate support for the company's environment management system

• Ability to work as part of team and follow work direction

• Participate in TRA, pre-job walk down and tool box meetings prior to start of work

• Routinely perform safety and productivity observations; shop, field and vehicle inspections transporting pig launchers to and from the job site with a semi tractor trailer

• Providing front-end loader support to the crew for snow removal and mobilizing materials

• Utilizing boom truck to swing launchers and receivers into position in accordance with the lift plan

 

Knowledge, Skills & Abilities:

 

• Basic knowledge of pigging operations

• Ability to read, understand and follow energy isolation drawings

• General knowledge of structural and mechanical piping maintenance operations

• General knowledge of rigging and bolt-up procedures

• Ability to help with pigging spool installation and removal

• Ability to work with minimal supervision and be capable of performing assigned tasks with limited technical guidance

• General mathematical knowledge

• Depending on assignment, may be required to prepare and process various types of documentation including permits and risk assessment completion to identify task hazards

• Must be self-motivated and work well with others

• Ability to follow all policies and procedures and work in a safe and productive manner

• Capable of learning various Worley and client safety and operational procedures and demonstrating required competencies

• Able to effectively communicate with fellow workers and alternate

• Advanced knowledge of all the following: mechanical piping, structural, and scaffold disciplines including: bolt up, rigging, pipefitting/installation

• Advanced ability to interpret mechanical drawing and P&ID

• Ability to operate other vehicles as assigned (pickups, 12-foot flatbed trucks- F-550, 12 foot box van trucks-F550) and equipment (i.e. Man lifts) in all-season adverse weather or road conditions

• Able to work in confined spaces and wear respirators

• Basic hand power/tool knowledge

• Ability to interpret work instructions

• Provides work leadership to lower level GMT's

 

Physical Demand/Work Environment:

 

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential functions of this job, the employee is required to:

 

• Must have ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, reach through low and high ranges, and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear.

• Must stand throughout evaluation.

• Aerobic capacity evaluation via 3 Minute step test.

• Sit and reach and range of motion evaluations.

• Lift 50 lbs. from floor to waist with two hands.

• Lift 50 lbs. from floor to shoulder with two hands.

• Carry 50 lbs. for 15 feet with two hands.

• Push/pull 60 lbs. sled for 20 feet.

• Push/pull 90 lbs. cart for 20 feet.

• Kneel 60 seconds, stand, kneel 60 seconds, stand.

• Squat 60 seconds.

This job description is intended to describe the nature and level of work being performed by people assigned to this position. It is not to be construed as an exhaustive list of all responsibilities and duties required of the job incumbents.

 

 

In-Vehicle Monitoring System: As part of our commitment to safety and accountability, company vehicles are equipped with in-cab cameras and vehicle monitoring systems. These systems may record video and audio, as well as collect GPS location, vehicle speed, harsh braking, rapid acceleration and other driving behaviors. All data is subject to review by management to ensure compliance with company policies and safe driving practices.

 

 

Qualifications

 

Qualifications:

 

• Class A CDL with Hazmat endorsement and the ability to be covered by Worley auto insurer

• NCCCO certification for Boom Truck or ability to obtain certification within 180 days of hire at cost to selected candidate

• One (1) year experience operating a front-end loader

• Equipment certification must be obtained within 180 days of start date (i.e. man lift, scissor)

• Rigging certification must be obtained within 180 days of start date

• IVES Front-End Loader Certification must be obtained within 180 days of start date

• High school diploma or equivalent (GED).

• Valid driver's license and the ability to be covered by Worley auto insurer.

• North Slope Training Cooperative (NSTC). Worley can provide NSTC certification training if needed.

 

Preferred Qualifications:

 

• Two (2) years’ experience working two or more of the following disciplines: rigging, bolt up, pipefitting installations, scaffolding and/or mechanical piping

• Two (2) years’ experience operation of a front-end loader

• One (1) year of energy isolation experience

• One (1) year experience with scaffolding

• Petrochemical, oilfield or arctic experience

• Prior North Slope Experience

Moving forward together

We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.

And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.

And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.